Accessories


USB to RS485 Converter


USB to RS485 is an industrial intelligent converter. It is the best solution for the communication between USB and RS485

  • Small volume, easy installation
  • No power supply needed, plug and play
  • Adopt DIP switch setup, random switch RS-485 interface
  • Transmit distance reach up to 1,800m at the rate of 115,200bps
  • Automatic send data control, auto distinguish and sense direction adopt data transfer
  • Auto sense serial signal rate, zero delay automatic transmit
  • Standard: USB1.1, EIA RS-485 standard
  • USB signal: VCC, DATA+, DATA-, GND, FG
  • RS-485 signal: D+, D, GND
  • Working format: asynchronism, point to point or multi-point, 2 lines half duplex
  • Direction: automatic send data control - no software drivers needs
  • Band rate: 300 - 115,200bps, automatic test signal rate
  • Loading: support 32 port loop environment (or handtailor 128 point)
  • Transmission: RS-485 side 1,800m (115,200bps), USB side 5m
  • Protection: 600W surge protection, 15KV static electricity protection
  • Interface type: USB side type A interface female, RS-485 side DB-9 male or 5 terminal blocks
  • Working temperature: -20 to 60 0C
  • Storage temperature: -25 to 85 0C
  • Relative humidity: 5% to 95%
  • Input powered: no external power supply needed
  • Consumption: static consumption less than 80mA, dynamic average consumption less than 150mA
  • Dimensions (L * W * H): 70 * 35 * 18mm
  • Shell: plastic
  • Color: black
  • Weight: 70g

Power Supply Unit - Model CP1218 -10A
Certification:
  • CE/ROHS
  • Input Voltage : AC 100-240V
  • Input Voltage Frequency : 50/60Hz
  • Output Voltage : DC 12V +/-5%
  • Total Output Current : 10A
  • Total Outputs : 18
  • Fuse Type : PTC (Resetable)
  • Fuse Rating : 1.1A
Features :
  • General protection: each output has independent PTC fuse and LED indicator, when problem  occurs, only affect the independent output, other outputs still working.
  • Circuit short protection: when short condition occurs, independent PTC fuse will open the circuit,when condition removed, PTC fuse will automatically back to close.
  • High voltage protection: when high voltage occurs, the surge protection  will be hit through to protect the connected device.
  • Over Current protection: when over current occurs, the power supply will automatically switch to self-protection status, when condition removed, then switch back to normal.
  • Application : CCTV Camera, PTZ, IR Illuminator, Video Processor: Access Control , etc.
  • Packing Dimension : 250 x 215 x 94 (mm)
  • Net Weight : 2.3Kg

VGA Extender (150m)

HT1201 VGA video Extender composes a local transmitter and a remote receiver, which are connect by the standard Cat5. The distance of the units can be extended up to 150m.Its ideal comes from any location which needs remote display VGA video signal. Such as: Large screen display ,long-distance image monitoring display ,multimedia information issue system.
  • Quantity of equipment : Transmitter x 1/Receiver x 1
  • Dimensions (L x W x H) : 80mm X 60mm X 22mm
  • Cable: CAT5,CAT5e,CAT6,CAT6e etc.
  • Differential gain: < 0.05%
  • Differential phase: < 0.05
  • SNR(weighting ): 90dB
  • Maximum bandwidth: 350M
  • Input impedance: VGA video 75O,VGA synchronism 4.7KO,
  • Input level : VGA video 0.7Vpp , VGA synchronism TTL
  • Working temperature : -25C ~ +75C
  • Relative humidity: 0~ 95%(Non-condensing)
  • Maximum resolution : 640X48 to 1920X1440
  • Packing Dimension (L*W*H):25cm*20cm*9cm
  • G.W.: 0.9kg







1 Channel Passive Power-Video-Data Transceiver
  • (Passive--Passive :330m transmission distance, Passive--Active: 1500m transmission distance)
  • Model No.: 206, 206-AC, 206A, 206A-AC






4 Channel Active Video Transceiver / 4 Channel Active Video Receiver
  • (Active--Passive :1500m transmission distance, Active--Active:2400m transmission distance)
  • Model No.: 411T, 411R





8 Channel Active Video Receiver / 16 Channel Active Video Receiver
  • (Active--Passive :1500m transmission distance, Active--Active:2400m transmission distance)
  • Model No.: 811R, 1611R

16 Channel Passive UTP Video Transceiver
(UTP116P is passive(non-amplified) video balun/transceiver that allows transmission of real-time and high performance color or monochrome (B/W) video over UTP cable. UTP116P can be used as either transmitter or receiver,it receives 16 channel video signals and provides 16 channels output without power supply. In standard 1U structure UTP116P is rack-mountable and excellent for multi-point surveillance.
  • No power required.
  • Transmission distance up to 300m working with passive transceivers (e.g.UTP104P).
  • Transmission distance up to 600m working with active receivers (e.g.UTP101AR,UTP116AR).
  • RJ-45 or green terminal block to be choosed from for UTP cable connection.
  • Compatible with worldwide formats including PAL, NTSC, SECAM.
  • Built-in surge&transient protection.
  • Super interference rejection.
  • Standard 1U structure.




CSA-6301KVM VGA Signal and Keyboard Mouse Extender
The CSA-6301KVM Extender comprises a Host unit (in the local side) and a Remote unit (in the remote side) which are connected by standard UTP cat 5 cable. The host unit receives one channel VGA video and one pair of key board and mouse signals from the console, as well as provides one port local VGA output with local KM and one channel UTP output for transmission. The power supply is through USB, As for the remote side, the unit receives one channel of UTP signal as well as provides one port VGA output and PS2 connector outputs for keyboard and mouse. With the brightness and contrast adjustments designed on, the quality VGA video can be adjusted in different distances and the distance is up to 300m(1000ft).
  • Transmission distance is up to 300m(1000ft).
  • Transmission via UTP cat5/5e
  • Extends VGA video, keyboard and mouse three signals
  • Real-time transmission
  • Quality image available with brightness and contrast adjustments designed on
  • Power supply: through USB in host unit and 12V DC in Remote unit
  • High video resolution - up to 1600 x 1200@80Hz
  • Exceptional reference rejection
  • Built-in transient protection
  • Multiplatform support: supports PC, Mac, Sun, and Linux, systems.
  • Supports VGA, SVGA, XGA, SXGA and Multisync monitors.
  • OS Support: Windows 2000, Windows XP, Linux, Mac and Sun





CSA-6401KVM Passive VGA Signal and Keyboard Mouse Extender
UTP6401KVM is passive KVM extender allowing extension of one channel Keyboard, VGA and Mouse signals over two pieces UTP cable.UTP6401KVM should be used in pair including a transmitter and a receiver. Adjusting knobs on panel are to be used in strongly interferential environment.
  • No Power required(Passive).
  • Transmission distance up to 75m(200ft).
  • High video resolution up to 1024×768 Pixels.
  • Support VGA, SVGA, XGA, SXGA, WXGA ,UXGA and multi-sync monitors.
  • Multi platform:PC,Mac,Sun and Linux systems.
  • Built-in surge&transient protection with grounding rod on front panel.
  • Super interference rejection.






CP 5000

  • Model : CP5000
  • CE/ROHS UL List
  • Input Voltage : AC 100-240V
  • Input Voltag : Frequency : 50/60Hz
  • Output Voltage : DC 12V +/-5%
  • Total Output Current : 5A
  • Minimum Order Quantity : 200PCS

12VDC 10 Amp CCTV Switching Power Supply

Specifications:
  • Input: 85-132VAC or 176-264VAC
  • Output: 12V DC 10Amp
  • Switch mode power supply (regulated voltage)
  • Over voltage, over current, and short-circuit protections
  • Integral Surge Protection
Standards: CE/RoHS

Packing Details:
  • Metal Case Size: 15.9(L)*9.8(W)*4.2(D)cm
  • Net weight: 495g
  • Inner Paper Box Size: 16.5*10.4*4.5cm

CCTV Power Supply 12VDC 5A Switching Mode, Desktop

  • Input: 100-240VAC, 50/60Hz;
  • Output: 12VDC 5A;
  • DC cord: 1.2m
  • DC plug: 5.5*2.1*12mm
  • Regulated voltage;
  • Desktop type

16ch Video,Power UTP Transceiver





Mode:UTP116PV-SV36
Product:16ch Video,Power UTP Transceiver
Description:Power supply input: 100V-240V AC; output: 36V 320W. Receive color video signal and supply camera power from up to 300M/1000FT. Provide stably 12V1A power supply for remote camera(working with UTP101PV-RM12). Each of 16 modules replacable, easy for maintenance. Compatible with worldwide formats including PAL, NTSC,SECAM. Built-in surge & ESD protection. Super interference Rejection.

Features:
  1. Power supply input: 100V-240V AC; output: 36V 320W.
  2. Receive color video signal and supply camera power from up to 300M/1000FT.
  3. Provide stably 12V1A power supply for remote camera(working with UTP101PV-RM12).
  4. Each of 16 modules replacable, easy for maintenance.
  5. Compatible with worldwide formats including PAL, NTSC,SECAM.
  6. Built-in surge & ESD protection.
  7. Super interference Rejection.

Specifications: UTP116PV-SV36

Power Properties

Input Power Supply: 100-240V AC(50-60Hz)
Output Power Supply: 320W 36V DC
Connector: Standard AC Jack
Max Output Current: 8.8Amp

Video Transmission Properties

Compatible with: All Baseband Signals, including PAL, NTSC, SECAM
Signal Band: 250MHz(-3db)
Balance Band: 0-6MHz
Attenuation: <1.5 dB
Interference Rejection: >60db
Electric Fan Noise: 40 ~ 60 dBA

Connection Properties

Video Output Connectors: 16* BNC-F; Impedance: 75Ω
UTP Cable Connectors: 16* RJ-45; Impedance: 100Ω

Protections

Video Output Protection: 2KV(common mode),10/700us IEC61000-4-5
Video Input Protection: 2KV (different mode), 4KV (common mode), 0/700us IEC61000-4-5